Z-Wave Triac AC Dimmable Driver 400W
Z-Wave Frequency: 868.42 MHZ (EU)
Input Voltage: AC100-240V
Output Voltage: AC100-240V
Output Current: 1.5A max.
Operating temperature: 0 to 40°C
Relative humidity: 8% to 80%
The in-wall dimmer is a Z-Wave device that is used to switch ON/OFF and adjust light intensity of the connected
light and can be controlled by other Z-Wave devices. The In-wall Dimmer can be included and operated in any
Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All
non- battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability
of the network.
The encryption mode that the dimmer supports is S2 Unauthenticated. When the dimmer is being included into
a Z-Wave network, you can use your primary controller/gateway to enable encryption mode or disable
encryption. (The primary controller/gateway shall support encryption mode configuration). The dimmer
supports OTA and can update firmware wirelessly.