Tilbud

Fibaro Flood Sensor

449,00 DKK 349,00 DKK Inkl. moms

Fibaro Flood Sensor

På lager

Varenummer (SKU): FGFS-101 Kategorier: ,

Beskrivelse

Fibaro Flood Sensor

FIBARO Flood Sensor er en universel, Z-Wave kompatibel, oversvømmelses- og temperatursensor.
Oversvømmelsesalarm sendes til Z-Wave-netværksenhederne eller til enhver alarmsystemkontrol, ved at åbne en NC-kontakt.
Enheden har indbygget temperaturføler, overvågningstemperatur af f.eks. gulv.
Flood Sensor er designet til at blive placeret på gulvet eller på en væg med en oversvømmelsessensor tilsluttet med ledning.
Enheden har indbygget visuel LED-indikator og akustisk alarm.
LED diode signaler oversvømmelse, driftstilstand.
Derudover er sensoren udstyret med en vippesensor, der rapporterer hældning eller bevægelse til hovedstyreenheden,
f.eks. når nogen har taget sensoren væk fra sin oprindelige placering.

Features:
Compatible with any Z-Wave or Z-Wave+ Controller
Supports protected mode (Z-Wave network security mode) with AES-128 encryption
May be connected to any alarm system (potential free output terminal)
Extremely easy installation – simply put on a surface prone to flooding
May be installed anywhere – flood sensor’s contacts extended with a wire
Battery or VDC powered. When connected to an external, 12/24V DC power source, the battery serves as an emergency power source
Theft protection – tilt is reported to the Z-Wave network or alarm system’s main controller
Two operating modes – flood/temperature sensor or just a temperature sensor.
Alarm is signalled by sound, visual indicator (LED diode) and Z-Wave

Technical data:
Power supply: Battery or 12–24V DC supply (LPS or NEC class 2)
Battery type: CR123A battery, 3.0V DC
Power consumption (at VDC operation) 0.4W
Output terminals maximum current carrying capacity: (ALARM NC, TAMP NC) 25mA
Maximum voltage at output terminals: (SMOKE NC, TAMP NC) 24V DC / 20V AC
EU standards compliance: RED 2014/53/EU RoHS 2011/65/EU
Radio protocol: Z-Wave Z-Wave+
Radio frequency: 868.4 MHz EU
Radio transmit power: up to -5 dBm (EIRP)
Range: up to 50 m outdoors up to 40 m indoors (depending on terrain and building structure)
Operational temperature: 0°C to 40°C – battery powering mode -20°C to 70°C – VDC powering mode
Measured temperature range: -20°C to 100°C
Temperature measuring accuracy: 0.5°C (within 0 – 40°C range)
Dimensions (diameter x height): 72 x 28mm

Fibaro Manual

Yderligere information

Vægt 0.12 kg
Størrelse 10 × 4 × 10 cm